Diy base e-liquid

Top quality e-liquid base intended for DIY mixing.
All ingredients are of the highest quality pharmaceutical grade purchased direct from manufacturers or top  chemical suppliers.

While many vendors hold in stock thousands of different strengths/flavours of e-liquid and a vast amount of e-cigarettes/spare parts we are proud to offer just twelve  items keeping our overheads low and the price to you down without compromising safety or quality.

You should not use this liquid without diluting.

Used to make your own blend mix to your finished strength or to strengthen up weaker mixes. High quality at a reasonable price. Available in 2 sizes 75ml or 200ml PG/VG/peg400. CHIP compliant labels and caps. Very strong 75ml square amber PET G bottles with child resistant closer and tactile warning symbol.  Very strong 200ml round amber PET bottles with child resistant closer and tactile warning symbol

You may only purchase from this site if you are 18 years or older you may NOT purchase on behalf of others who are below 18 years of age . We will cancel any transactions that we believe to break this rule.

After mixing the max strength for any mix should be below 36mg (super strong cigarettes)

Mixing Guide

Mixing guide for 52mg cige-liquid
The non nicotine diluent is your choice of PG /VG/ PEG and flavouring

 

Drops of 52mg
Cig e-liquid

 

 

 

Non Nicotine Dilutent
Including Flavour

 

 

 

Approx Finished Strength

 

 

 

 28  12  36mg – super high
 20  20  26mg – x high
 18  22  24mg – v high
 14  26  18mg – high
 9  31  12mg – medium
 5  35  6mg – low

(total number of drops 40)(drop size can vary dramatically between liquids of different viscosities)
flavouring you will need between 1-25% of the finished liquid depending on your tastes and the maker

This mixture is 52mg per 1ml not per bottle 1000mg = 1ml

This base e-liquid when mixed 50/50 (1/2 and 1/2) or 1 part plus 1 part with a liquid containing no nicotine results in the finished e-liquid having a strength of 26mg per ml ( 2.6%)

  • 2 parts of this 52mg plus 1 part of a nicotine free liquid will result in a finished strength of 34.66 mg or 3.46% super high
  • 1 part of this 52mg plus 1 part of a nicotine free liquid will result in a finished strength of 26mg or 2.6 % x high
  • 1 part of this 52 mg plus 2 parts of a nicotine free liquid will result in a finished strength of 17.33 mg or 1.73% high
  • 1 part of this 52mg plus 3 parts of a nicotine free liquid will result in a finished strength of 13mg or 1.3% medium
  • 1 part of this 52mg plus 8 parts of a nicotine free liquid will result in a finished strength of 5.77mg or 0.577% low

Most  mixes need to sit and stew for an hour or two to achieve their final taste, and some will need days.Some flavours are very very strong if you have not used a particular flavour before start off with a small amount and work up.

Avoid contaminating the main bottle of unflavoured e-liquid

Over time your bottle of Nicotine will react with O2 to make brownish cotinine. There is trace O2 present in VG or PG/PEG. It takes almost no cotinine to yellow this mixing liquid, the more O2 the darker it turns. This will not reduce the nicotine by more than a few % and it will remain fit to use.

 


Leave Comment

author
By Eric
Top Blog Authors
Categories

All rights reserved © Designed by ejuiceclones.com